Please ensure that USB data cable to USB port on your computer is
unplugged; also ensure that all connection to internet must be stopped
Insert CD in to the CD-ROM. The default driver directory is E:
ZTE_USBDriver. Click the folder “USB Driver”. Click ZTE_USB Driver
System pops up the interface [ZTE_USBDriver-installshield wizard] click
“Next”
Click “Next” on “Destination Folder”
Click “install” to begin the installation at “Ready to install the
program”
Click “Finish”, USB driver program is installed and the installation is
stopped for the moment
Connect ZTE set with PC through USB data cable (available with each set)
If “USB Device Not Recognized” appear on the computer Terminal hasn't
powered on (Power-Off the Terminal and then Power-On the Terminal again). When
Terminal is powered on “Found New Hardware” will appear on the computer SYSTEM WILL FOLLOW EITHER OR COMBINATION OF FOLLOWING STEPS
A found new hardware wizard window will pop up asking for “Can windows
connect to windows update to search the software”. Select “No, not this time”
and then click “Next”
Another “Found New hardware Wizard” window will appear on the computer.
Select “Install from a list specific location (Advanced)” and click “Next” to
continue
A new window will appear asking “Please choose your search and
installation options”, select “Don't search I will choose the driver to
install” and click “Next”
System will pop up another interface asking [Hardware Type], choose
“Modem” and click “Next', click “Have Disk”, “Browse”, C:/Program
FilesZTEZTE_USBDriverWin2k&XP ZTEdm2k&XP, click “OK” and click “Next”.
A window with warning message will appear; click “Continue anyway” and
wait until a window appears stating “completing the found new hardware
wizard”, Click “Finish”
To verify modem installation select “Control Panel”, “Phone and Modem”,
“Modem”, select” Qualcomm USB Modem” and click “Properties, Diagnostics, Query
modem” if system affirms successful installation of modem follow next step, or
else repeat all previous steps
The system will pop up the interface [New connection wizard], click
“Next”
Select “set up my connection manually” and click “Next”
Select “Connect using a dial up modem” and click “Next”
Select “Qualcomm USB MODEM” and click “Next”
The system will pop up [connection name]. Enter name (V PTCL) and click
“Next”
The system will pop up [phone number to dial]. Enter #777 and click
“Next”
Enter “User Name” and “Password” and click “Next”
User Name = vwireless@ptcl.com small letters
Password = ptcl
Click “Add a short cut to this connection to my desktop” and click
“Finish”
Start Connection
Double click the shortcut on desktop or Go to START, CONNECT TO, and
SHOW ALL CONNECTIONS, Double click V PTCL
Click “DIAL”
Once you get connect status of your connection, V PTCL displays
connected ^ Go top
ZTE FWT
Please ensure that USB data cable to USB port on your computer is
unplugged; also ensure that all connection to internet must be stopped
Insert CD in to the CD-ROM. The default driver directory is EZTE_USBDRIVER.
Click the folder “USB Driver”. Click ZTE_USB Driver
System pops up the interface [ZTE-USBDriver_ InstallShield Wizard], click
“Next”
Click “Next” on “Destination Folder”
Click “install” to begin the installation at “Ready to install the
Program”
Click “Finish”, USB driver program is installed and installation is
stopped for a moment
System will pop up interface [Restore your computer] click “Ok”
After the installation of USB Driver Program is finished, Connect ZTE set
with PC through using data cable (available with each set)
If “USB Device Not Recognized” appear on the computer, Terminal hasn't
powered on (Power-Off the Terminal once and Power-On Terminal again). When
Terminal is powered on “Found New Hardware” will appear on the computer
The system will pop up interface [Welcome to the found new hardware
wizard]; this wizard helps you install a device driver for a hardware device,
click “Next”
In the new pop up check “display a list of the known drivers for this
device so that I can choose a specific driver”, click “Next”
In the new pop up click “Have disk”
System will pop up interface [Install from disk], click “Browse”
Select folder C:Program Files, ZTE, ZTE_USBDriver, Win2k and click “OK”
In the new pop up, click “Next”, “Next”
In the new pop up system will mention that “software you about to install
does not contain a Microsoft digital signature…Do you want to continue the
installation?” click “Yes” and then click “Finish”
Qualcomm USB Modem will appear in Device Manager. Now the installation of
USB Driver program under Windows 2000 system is complete. Add Network Connection
1. Click START, PROGRAM, ACCESSORIES, COMMUNICATION, INTERNET CONNECTION
WIZARD
2. System will pop up interface [Welcome to the internet connection wizard]
3. Check “I WANT TO SET UP MY INTERNET CONNECTION MANUALLY OR I WANT TO
CONNECT THROUGH A LOCAL AREA NETWORK [LAN], Click “Next”
4. System will pop up interface [Setting up your internet connection] check
“Connect through a phone line and a modem” and click “Next”
5. The system will pop up interface [choose a modem] select “QUALCOMM USB
MODEM” and click “Next”
6. System will pop up interface [internet account connection information]
write #777 in “Telephone number” and uncheck “DIAL USING THE AREA CODE AND
COUNTRY CODE” and click “Next”
7. System will pop up interface [internet account log on information] Enter
“User Name” and “Password” and click “Next”
a. User Name = vwireless@ptcl.com small letters
b. Password = ptcl
8. System will pop up interface [Configuring your computer] Enter “V PTCL”
in connection name
9. System will pop up interface [set up your internet mail account] select
“No” to “DO YOU WANT TO SET UP AN INTERNET MAIL ACCOUNT” and click “Next”
10. Check the box “Connect to internet immediately” and click “Finish”
11. Enter password and click “Connect”
12. To create a short cut click START, PROGRAM, ACCESSORIES, COMMUNICATION,
NETWORK AND DIAL UP NETWORKING
13. Right click V PTCL and create short cut to desktop
14. To start connection double click short cut on the desktop. Once you get
connected status of your connection V PTCL displays connection ^ Go top
ZTE FWT
Please ensure that USB data cable to USB port on your computer is
unplugged; also ensure that all connection to internet must be stopped
Insert CD in to the CD-ROM. The default driver directory is EZTE_USBDRIVER.
Click the folder “USB Driver”. Click ZTE_USB Driver
System pops up the interface [ZTE-USBDriver_ InstallShield Wizard], click
“Next”
Click “Next” on “Destination Folder”
Click “install” to begin the installation at “Ready to install the
Program”
Click “Finish”, USB driver program is installed and installation is
stopped for a moment
System will pop up interface [Restore your computer] click “Ok”
After the installation of USB Driver Program is finished, Connect ZTE set
with PC through using data cable (available with each set)
If “USB Device Not Recognized” appear on the computer, Terminal hasn't
powered on (Power-Off the Terminal once and Power-On Terminal again). When
Terminal is powered on “Found New Hardware” will appear on the computer
The system will pop up interface [Add new hardware wizard], this wizard
searches for new drivers for USB composite device, click “Next”
In the new pop up check “display a list of all the drivers in a specific
location, so you can select the driver you want” and click “Next”
In the new pop up click “Have disk”
System will pop up interface [Install from disk], click “Browse”
Select folder C:Program Files, ZTE, ZTE_USBDriver, Win98 and click “OK”
In the new pop up, click “Next”, “Next”, then click “Finish”
Qualcomm USB Modem will appear in Device Manager. Now the installation of
USB Driver program under Windows 98 system is complete
Add Network Connection
Click START, PROGRAM, ACCESSORIES, COMMUNICATION, INTERNET CONNECTION
WIZARD
OR
START, PROGRAM, ACCESSORIES, INTERNET TOOLS, INTERNET CONNECTION WIZARD
System will pop up an interface [Welcome to the internet connection
wizard]
Check “I WANT TO SET UP MY INTERNET CONNECTION MANUALLY OR I WANT TO
CONNECT THROUGH A LOCAL AREA NETWORK [LAN] and click “Next”
System will pop up interface [Setting up your internet connection] Check
“Connect through a phone line and a modem” and click “Next”
The system will pop up interface [choose a modem] select “Qualcomm USB
MODEM” and click “Next”
System will pop up interface [internet account connection information]
write #777 in “Telephone number” and uncheck “DIAL USING THE AREA CODE AND
COUNTRY CODE” and click “Next”
System will pop up interface [internet account log on information] Enter
“User Name” and “Password” and click “Next”
User Name = vwireless@ptcl.com small letters
Password = ptcl
System will pop up interface [Configuring your computer] Enter “V PTCL”
in connection name
System will pop up interface [set up your internet mail account] select
“No” to “Do you want to set up an internet mail account” Click ”Next”
Check the box to “Connect to internet immediately” and click “Finish”
Enter password and click “connect”
To create a short cut click START, PROGRAM, ACCESSORIES, COMMUNICATION,
DIAL UP NETWORKING
Right click V PTCL and create short cut to desktop
To start connection double click short cut on the desktop. Once you get
connected status of your connection V PTCL displays connection
Disclaimer : This website is not affiliated with
PTCL or its contents in any way
